Extron electronics IPL M PDP-ES User Manual Download Page 3

Page: 3 / 36

IPL M PDP-ES • Quick Start Guide

QS-1

To install and set up the IPL M PDP-ES interface card, follow
these steps:

Step 1

Turn all of the equipment off

and disconnect it from the power

source.

Step 2

Remove the preinstalled Pioneer communication ES card

from the

Pioneer plasma. Refer to Removing the Pioneer communication ES card
in chapter 2 for more information.

Step 3

Install the Extron IPL M PDP-ES interface card

into the Pioneer

plasma. Refer to Installing the Extron IPL M PDP-ES card in chapter 2
for more information.

Step 4

Affix the Extron IPL M PDP-ES sticker label to the display, covering
the existing Pioneer label.

Step 5

Attach the network (LAN) cable

to the LAN port of the

IPL M PDP-ES interface card installed in the Pioneer plasma. Attach
the other end to a switch, hub, router, or a host PC, as shown below.
See Ethernet/LAN port in chapter 3 for more information on this
connection.

IPL M PDP-ES

ACT

LINK

RESET

LAN

RS-232

Extron
IPL M PDP-ES

Pioneer Plasma Ethernet Card

Extron
MLC 206

MediaLink Controller

RS-232

LAN

MLC 206

DISPLAY
POWER

VOLUME

MAX/

MIN

VCR

DVD

Laptop

Quick Start Guide — IPL M PDP-ES

im Vertrieb von

CAMBOARD Electronics

www.camboard.de

Tel. 07131 911201
Fax 07131 911203

[email protected]

Summary of Contents for IPL M PDP-ES





































Search results

Summary of Contents for IPL M PDP-ES

Reviews:

Related manuals for IPL M PDP-ES

Brands by name

Popular brands

Extron electronics IPL M PDP-ES, User Manual

Search results

Summary of Contents for IPL M PDP-ES

Reviews:

Related manuals for IPL M PDP-ES

Brands by name

Popular brands