Scheduling output receptacle power
To schedule power on and off to the output receptacle:
1.
In the
Receptacle
1
section, click
On
or
Off
to select the power setting that you want
to schedule for the week. A
Set
Schedule
For
section appears above the
Scheduling
section, displaying the receptacle number (always
1
, for PC1/PC1i), the power selection
you clicked (
On
or
Off
), and menus from which to select the hour, minutes, and am/pm.
The illustration below shows the
Set
Schedule
For
section, with
Power
On
scheduled
for 6:00 am Monday through Friday.
Figure 27.
Set Schedule For Section, Displayed for Receptacle 1
2.
From the drop-down menus, select the time (hour, minutes, and am or pm) at which
you want power turned on or off.
3.
Select the check boxes for the days of the week you want the receptacle to be turned
on or off at the time you specified.
4.
When finished, click
Set
to save your settings and close the
Set
Schedule
For
section.
The settings you entered appear in the
Current
Schedule
in the
Receptacle
1
section.
5.
Repeat step
s 1 through 4 for
any additional power settings you want to make.
27
IPL T PC1 • HTML Configuration and Control
35
Summary of Contents for IP Link IPL T PC1
Page 6: ......
Page 8: ...IPL T PC1 Contents viii ...
