IN1403 User’s Manual
18
Advanced Operation
Pass-through RGB video
Input 4 is for passive RGB video. No scaling or video functions are available for this input. Only
switching of the RGB signal is provided from the front panel or the RS-232 control. All color and sync
signals are passed through an internal distribution amplifier and then to the output connectors. Blank,
freeze, the on-screen menu, and other video functions are not available. Audio is an active function,
and all audio functions are still available for Input 4, even though the menu cannot be displayed.
Output RGB connectors
The dual RGB outputs of the IN1403 are individually buffered (including signals from
Input 4). They may both be connected simultaneously without degradation of the other
output. Both are capable of transmitting the RGB signal over 100 feet or more through high
quality coaxial cables.
Output modes
The IN1403 can be set to output any of the following output modes:
Refresh Rate (Hz)
Resolution Mode
Aspect Ratio* 56 60 65 72 75 85 96 100 120
640 x 480
VGA
4:3
800 x 600
SVGA
4:3
852 x 480
HDTV - 480p
16:9
1024 x 768
XGA
4:3
1152 x 864
4:3
1280 x 720
HDTV – 720p 16:9
1280 x 768
16:9
1280 x 1024
SXGA
5:4
1365 x 768
Wide XGA
16:9
1365 x 1024
4:3
*
The length verses the height of the output image determines the output aspect ratio.
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203