IN1403 User’s Manual
10
Comb/Trap Filter
selects either the comb or trap filter (only available with composite video). The
comb filter electronically provides excellent Luma/Chroma separation (separates the color from the
picture signal). This greatly reduces cross-color interference and hanging dots while maintaining
image bandwidth and detail.
The trap filter extracts luminance from the picture. The trap filter is usually the preferred setting when
you are running signals from a VCR (as composite video). You may wish to compare both settings to
determine which is best for your application.
Neither filter has any effect on S-video signals.
Reset Video
resets all video settings to factory default (for current input only).
Audio menu
The IN1403 allows you to manually adjust the bass, treble, and balance settings. To do so
1.
Press the desired Input Select button.
2.
Press MENU.
3.
Press the
or
button (if necessary) to reach the input menu.
4.
Press
ENTER
.
5.
Use the
and
buttons and the
ENTER
key to select the setting you wish to adjust.
6.
Press
ENTER
to save once you’ve optimized the setting for the current input.
The following audio adjustment parameters can be controlled via the on-screen menu system (front
panel buttons). RS-232 serial control instructions can be found on page 19.
While on-screen menus are not displayed for Input 4, all audio functions are still available for this
input.
Bass
increases/decreases the lower frequencies of the audio signal.
Range:
6 to 27
Factory Default Setting:
16 (0.0dB)
Operation:
Press
button
to increase the bass frequencies.
Press
button to decrease the bass frequencies.
Treble
increases/decreases the higher frequencies of the audio signal.
Range:
8 to 25
Factory Default Setting:
16 (0.0dB)
Operation:
Press
button
to increase the treble frequencies.
Press
button to decrease the treble frequencies.
Balance
shifts the audio balance toward the right or left audio channels.
Range:
0 to 31
Factory Default Setting
: 16
Operation:
Press
button
to move the balance toward the right channel.
Press
button to move the balance toward the left channel.
Reset Audio Settings
reset
all
audio settings to factory default (for current input only)
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203