$6#3$s)NSTALLATION
3
Installation
4HISSECTIONGIVESANOVERVIEWOFTHESTEPSFORINSTALLINGTHE$6#3$)TALSOPROVIDESA
description of the rear panel connectors and instructions for cabling. Topics include:
s
Installation Overview
s
Rear Panel
s
Connecting for Remote Control
Installation Overview
CAUTION:
Installation and service must be performed by authorized personnel only.
&OLLOWTHESESTEPSTOINSTALLANDSETUPTHE$6#3$
1.
Disconnect power from the converter and ensure that all other devices that will be
connected to it are powered off.
2.
(Optional)
Mount the unit in a rack or to furniture
(see “
Mounting the
DVC 501 SD Converter
” in the “Reference Information” section).
3.
Connect the input.
#ONNECTAN3$)($3$)OR'3$)SOURCETOTHE'($3$3$)
)NPUT".#CONNECTOR
b
in figure 2 on the next page).
4.
(Optional)
Connect a monitor or recording device.
Attach a monitor or a video
RECORDINGDEVICETOTHE"UFFERED,OOPTHROUGH)NPUT".#CONNECTOR
c
in figure 2).
5.
Connect the video output.
Connect a display or other output device to one of the
following connectors:
s
DVD-D
— Digital video (
d
in figure 2)
s
RGB/R-Y,Y,B-Y
!NALOG2'"2'"(62'"3AND2'S" OR956COMPONENTVIDEO
(
e
in figure 2)
6.
Connect the audio output.
Connect an amplifier or other audio output device to the
5-pole captive screw audio connector (
f
in figure 2).
7.
Connect a control device.
Connect a computer or control system to one of the
FOLLOWING$6#PORTSTOCONFIGUREANDCONTROLTHECONVERTERVIA3)3COMMANDS
s
Config port
(front panel)
53"CONNECTION
a
in figure 9, “
Operation
”
section)
s
RS-232 port (rear panel)
— Serial RS-232 connection (
g
in figure 2)
NOTE:
See “
Command and Response Table
” in the “Remote Configuration
and Control” section for definitions of the SIS commands
.
8.
0LUGASTANDARD)%#POWERCORDPROVIDED INTOTHEPOWERRECEPTACLE
a
in the diagram
ONTHENEXTPAGE #ONNECTTHE$6#TOATO6!#(Z!#POWERSOURCE
9.
#ONFIGURETHE$6#3$ASNEEDEDUSINGTHEFRONTPANELMENUSSEEh
Menus on
the LCD Screen
” in the “Operation” section) or SIS commands (see the “
Remote
Configuration and Control
” section).