$6#3$s)NSTALLATION
6
RS-232
Computer or
Control System
RS-232 Port
DVC 501 SD or
Rear Panel
RS-232 Port
NOTE:
If you use cable that has a drain
wire, tie the drain wire to ground
at both ends.
Tx Rx
NOTE:
Connect a ground wire between the DVC
and the computer or control system.
1 2 3
N/A
Ground ( )
Transmit (Tx)
Receive (Rx)
Transmit (Tx)
Receive (Rx)
Figure 5.
Connecting to the RS-232 Port
In the “Remote Configuration and Control” section, see “
Using SIS Commands
” for
information on sending SIS commands to this port.
Connecting to the USB Config Port
4HEMINI4YPE"53"#ONFIGPORTISLOCATEDONTHE$6#FRONTPANEL)TCANBEUSEDTO
configure the converter via SIS commands.
1.
5SEA53"!TOMINI"CABLETOCONNECTTHE$6#53"#ONFIGPORTTOA53"PORTONYOUR
computer.
USB Cable
Type
A
USB
Mini Type
B
USB
USB 1
USB
Ports
Computer
Converter Front Panel
Extron
NEXT
MENU
DVC SERIES
DIGITAL VIDEO CONVERTER
ADJUST
CONFIG
Figure 6.
Connecting to the Config Port