DMP 64 Plus • Dante Controller
26
To rename a DMP 64 Plus receiver or transmitter:
Figure 31.
Device View Screen — Renaming a Receiver or Transmitter
1.
Open the
Device View
dialog box of the DMP 64 Plus.
2.
From the
(Select a Dante Device..)
drop-down list, select the name of the
desired DMP 64 Plus (see figure 31,
1
).
3.
On the
Device View
screen, select the
Receive
tab or
Transmit
tab (
2
) as desired.
4.
Click the name of the receiver or transmitter to be renamed. The name becomes a text
box with a cursor (
3
).
5.
Enter the new name (up to 31 characters) using any combination of letters, numbers,
and special characters except for
@
,
=
, and
.
(period).
6.
Press
<Enter>
on the keyboard to confirm the name, or click another channel text box.
7.
Repeat steps 4 through 6 to rename additional receiver or transmitter channels.
8.
When finished renaming receivers and transmitter, close the
Device View
dialog box.
Finding a Dante Device IP Address
To find the IP address of a Dante device, the name of the device is needed (see
the DMP 64 Plus in Dante Controller
NOTE:
If the DMP 64 Plus has not been renamed, its default name consists of the
product name followed by a hyphen, plus the last 6 digits of the device MAC address
(for example,
DMP64Plus-0ee8ee
).
Figure 32.
Device Info Page
1.
Open Dante Controller.
2.
On the
Dante Controller-Network View
screen, click the
Device Info
tab (see
1
).
3.
On the
Device Info
page, locate the name of the DMP 64 Plus in the
Device Name
column (
2
). The IP address is located in the
Primary Address
column (
3
). In
figure 32, the IP address for the connected DMP 64 Plus is
192.168.11.120
.
31
32
