CrossPoint / MAV Matrix Switchers • Introduction
1
Introduction
NOTES:
•
For more information on any subject in this guide,
refer to the CrossPoint 450 Plus / CrossPoint Ultra /
MAV Plus User Guide, available on the Extron website
(
www.extron.com
).
•
In this manual, the term “CrossPoint”, when
“450 Plus” or “Ultra” is not specified refers to either the
CrossPoint 450 Plus or the CrossPoint Ultra.
About this Guide
This setup guide allows you to easily and quickly set up and
configure your matrix switcher. Step by step instructions show you
how to connect the hardware. The guide also shows you how to
perform basic operations and use both the front panel controls and
selected Simple Instruction Set (SIS) commands. This guide also
shows you how to load and start up the Windows
®
-based Matrix
Switchers Control Program. Lastly, this guide shows you how to
connect to the built-in HTML pages, which you can use to operate
the switcher.
About the Matrix Switchers
The Extron matrix switchers covered in this manual distribute any
input to any combination of outputs. The switchers can route multiple
input/output combinations simultaneously. The switchers are
available in a variety of matrix sizes (the number of inputs and outputs).
The CrossPoint switchers are available in HV (RGBHV video) and
HVA (RGBHV video and audio) models.
The MAV Plus matrix switchers are available in the following models:
•
HDA
— HDTV/component video and audio
•
HD
— HDTV/component video only
•
SVA
— S-video and audio
•
SV
— S-video only
•
AV
— Composite video and audio
•
AV RCA
— Composite video and audio on RCA connectors
(128 size only)
•
V
— Composite video only
•
A
— Audio only
