12
CrossPoint / MAV Matrix Switchers • Operation
Selecting Lock mode 2 or toggling between
mode 2 and mode 1
NOTES:
•
If the switcher is in Lock mode 0 or mode 1, this
procedure selects mode 2.
•
If the switcher is in Lock mode 2, this procedure selects
mode 1.
Toggle the lock on and off by pressing and holding the
Video
button and the
Audio
button for approximately 2 seconds.
I / O
VIDEO AUDIO
I / O
VIDEO
AUDIO
Press and
hold
simultaneously.
The buttons blink twice.
Release the buttons.
2 seconds
Viewing and Adjusting the Audio Level
1.
Press and
hold
the
Audio
button until it flashes.
AUDIO
AUDIO
Audio button blinks.
Press and
Hold
2 seconds
2.
Press an input or output button. Refer to the
CrossPoint 450 Plus / CrossPoint Ultra / MAV Plus Switcher
Manual
, chapter 3, “Operation”, to read the displayed value.
3.
Increase/decrease the level or volume by pressing the
Esc
(
>
)
and
View
(
<
) buttons.
4.
Press and release the
Audio
button to exit.
