8
68-3552-01 Rev. A
05 20
© 2017-2020 Extron Electronics — All rights re
All trademarks mentioned are the property of their respective owners.
Worldwide Headquarters:
Extron USA West, 1025 E. Ball Road, Anaheim, CA 92805, 800.633.9876
For information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related topics, see the
Extron Safety and Regulatory Compliance Guide
on the Extron website.
Installation Checklist
Check with local and state regulations before starting the installation.
Check all parts and equipment before installation.
Determine the best location for the enclosure
Choose a method for cutting the hole in the table.
Preparing the Cable Cubby (page 3-5)
Mounting the Cable Cubby in the Table (page 5)
Mount the Cable Cubby flush with the table
.
Adjust the side clamps under the table.
Installing Retractors (page 7)
Routing and Connecting Cables (page 8)
Routing and Connecting Cables
CAUTION:
Risk of Electric Shock
.
This equipment must be grounded.
ATTENTION :
Risque de choc électrique
.
Cet équipement doit être fixé au sol.
NOTE:
Ensure that there is no tension on the power
cable.
Connect cables to the AV system
and connect the AC power cord.
3
Using zip ties, secure cables to the holes
on the bottom of the Cable Cubby.
2
For cable pass-through applications,
allow at least 36 inches (0.9 m) of cable
loop for each cable.
1
