background image

6

Extreme Networks Data Sheet: 

Summit X250e Series

Technical Specifications

EPS-500 

EPS-500 is the redundant AC Power Supply for higher power consuming AC 
PSU-based switches including PoE-enabled switches. EPS-500 is one rack 
unit height and works in standalone mode. EPS-500 can be rack-mounted in 
a regular 19 inch rack system. EPS-500 comes with a DC output cable to 
connect between the Summit switch and EPS-500.

EPS-600LS and EPS-C 

EPS-600LS is a power module that works with the EPS-C External Power 
System Chassis. EPS-C has three slots for EPS-600LS and one DC output to 
connect to high-density PoE Summit switches. Depending upon the number 
of EPS-600LS installed in EPS-C, it can provide: 1) Redundant configuration 
for up to 370 watts of PoE power with one EPS-600LS installed; 2) Non-
redundant configuration for up to 740 watts of PoE power when two 
EPS-600LS are installed; and 3) Redundant configuration for up to 740 watts 
of PoE power when three EPS-600LS are installed. EPS-C comes with a DC 
output cable to connect between the Summit switch and EPS-C with 
EPS-600LS installed.

EPS-150DC and EPS-T2 

EPS-150DC is the redundant DC Power Supply for DC PSU-based Summit 
switches. The EPS-T2 power tray is required to rack-mount this external 
power supply. EPS-T2 power tray can take up to two EPS-150DC power 
modules, and each EPS-150DC works individually. EPS-150DC comes with a 
DC output cable to connect between the Summit switch and EPS-150DC.

Front View

Front View

Front View

Front View

Rear View

Configured 

View

Rear View

Rear View

Accessories

Summit X250e Series Redundant PSUs

EPS-160 and EPS-T

EPS-160 is the redundant AC Power Supply for lower power consuming AC 
PSU-based Summit switches. The EPS-T power tray is required to rack-mount 
this external power supply. EPS-T power tray can take up to two EPS-160 
power modules, and each EPS-160 works individually. EPS-160 comes with a 
DC output cable to connect between the Summit switch and EPS-160.

Redundant PSU Compatibility Matrix

Summit Switch Models

Summit Switch 

Part Number(s)

External Redundant PSU options

Summit X250e-24t/48t/24x 

15101/15103/15109

EPS-160 power module (10907) with EPS-T (10906)

Summit X250e-24p

15105

EPS-500 external power supply (10911)

Summit X250e-48p/48p-TAA

15107/15108

EPS-C (10912) and EPS-600LS (10913)

Summit X250e-24tDC/48tDC/24xDC

15121/15122/15123

EPS-150DC power module (10909) with EPS-T2 (10910)

Summary of Contents for Summit X250e Series
















Reviews: