manualshive.com logo in svg

Extreme Networks ExtremeSwitching SLX 9540, Hardware Installation Manual

Share
Download
Extreme Networks ExtremeSwitching SLX 9540 Hardware Installation Manual Download Page 61

Transceivers and Cables

•

Supported transceivers and cables............................................................................................................................................................ 61

•

Time and items required.................................................................................................................................................................................61

•

Precautions specific to transceivers and cables....................................................................................................................................62

•

Cleaning the fiber-optic connectors...........................................................................................................................................................62

•

Managing cables................................................................................................................................................................................................63

•

Installing an SFP+ transceiver...................................................................................................................................................................... 63

•

Replacing an SFP+ transceiver.................................................................................................................................................................... 65

•

Installing a QSFP28 transceiver................................................................................................................................................................. 67

•

Replacing a QSFP28 transceiver............................................................................................................................................................... 69

•

Breakout cables..................................................................................................................................................................................................70

•

Verifying transceiver operation.....................................................................................................................................................................71

Supported transceivers and cables

SLX 9540 Switch requires QSFP28 optics for 100GbE connectivity, QSFP+ optics for 40GbE connectivity, and 40GbE-to-10GbE
breakouts for 10GbE connectivity.

SLX 9540 Switch requires SFP+ optics for 10GbE connectivity and SFP optics for 1GbE connectivity.

For current information about transceivers and cables that is supported by this device, refer to the 

Extreme Ethernet Optics Family

Datasheet

 on 

https://cloud.kapostcontent.net/pub/a070d154-d6f1-400b-b2f0-3d039ae2f604/data-center-ethernet-optics-data-

sheet

 and to the current Extreme 

SLX-OS18r.2.00 for SLX 9540 Release Notes 

.

Time and items required

The installation or replacement procedure for one transceiver takes less than 5 minutes. Ensure that the following items are available:

•

Required number of compatible power cables

•

Required number of supported Extreme-branded transceivers

•

Required number of compatible fiber-optic cables

•

Optical transceiver extraction tool (for 10 Gbps transceiver only)

NOTE

Most Extreme devices come with a transceiver extraction tool and holster. The extraction tool is designed to remove
transceivers from modules where the space is limited.

ExtremeSwitching SLX 9540 Hardware Installation Guide

9036360-00 Rev AB

61

Summary of Contents for ExtremeSwitching SLX 9540













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands