manualshive.com logo in svg

Extreme Networks ExtremeSwitching SLX 9540, Hardware Installation Manual

Share
Download
Extreme Networks ExtremeSwitching SLX 9540 Hardware Installation Manual Download Page 30

•

Hardware devices illustrated in these procedures are only for reference and may not depict the device you are installing in the
rack.

Installation requirements

Review the installation and facility requirements for your product before mounting the device . Refer to the hardware installation guide for
your product for more information.

Lifting requirements

For 1U and 2U devices, two people are required to install the device in a rack. One person holds the device, while the other screws in the
front and rear "L" brackets.

Time and items required

Allow 15 to 30 minutes to complete the installation.

The following items are required to install the device using the Universal Two-Post Rack Kit:

•

#2 Phillips torque screwdriver

•

1/4-inch slotted-blade torque screwdriver

Parts list

The following parts are provided with the Universal Two-Post Rack Kit (XEN-R000294).

Installing the Universal Two-Post Rack Kit (XEN-R000294)

ExtremeSwitching SLX 9540 Hardware Installation Guide

30

9036360-00 Rev AB

Summary of Contents for ExtremeSwitching SLX 9540













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands