Extreme Networks ExtremeSwitching 5520 Series Hardware Installation Manual Download Page 6

Page: 6 / 162

Port LEDs in STK Mode................................................................................................................................ 126

Versatile Interface Modules (VIM) Port LEDs............................................................................................. 126

5520-VIM Port LEDs in Default (SYS) Mode...................................................................................... 127
5520-VIM Port LEDs in SPD Mode..........................................................................................................127

Technical Specifications..................................................................................................128

ExtremeSwitching 5520 Series Technical Specifications..................................................................... 128

V300 Virtual Port Extender Specifications................................................................................................. 135

V400 Virtual Port Extender Technical Specifications............................................................................138

Power Specifications......................................................................................................................................139
Fan and Acoustic Sound............................................................................................................................. 140
Standards and Environmental Data.......................................................................................................140

Half-Duplex to Full-Duplex Converter Technical Specifications.........................................................141

Half-Duplex to Full-Duplex Converter Power Specifications..................................................... 142
Half-Duplex to Full-Duplex Converter Environmental Data and Standards....................... 142

350 W AC Power Supplies Technical Specifications.............................................................................. 143

Summit 350 W AC Power Supply (10953)......................................................................................... 143

715 W AC Power Supplies Technical Specifications................................................................................144
1100 W AC Power Supplies Technical Specifications..............................................................................145

AC Power Supplies......................................................................................................................................... 145

2000 W AC Power Supply Technical Specifications..............................................................................146
Power Cord Requirements for AC-Powered Switches and AC Power Supplies....................... 146
Console Connector Pinouts.................................................................................................................................147

Safety and Regulatory Information...............................................................................150

GBIC, SFP (Mini-GBIC), QSFP+, XENPAK, and XFP Regulatory Compliance.................... 153

Taiwan BSMI Warning....................................................................................................................................156
China CCC Warning........................................................................................................................................156

Japan (VCCI Class A)............................................................................................................................................. 156
Korea EMC Statement............................................................................................................................................156

Index...................................................................................................................................158

Table of Contents

ExtremeSwitching 5520 Series Hardware Installation Guide

Summary of Contents for ExtremeSwitching 5520 Series



































































































































































Search results

Summary of Contents for ExtremeSwitching 5520 Series

Reviews:

Related manuals for ExtremeSwitching 5520 Series

Brands by name

Popular brands

Extreme Networks ExtremeSwitching 5520 Series, Hardware Installation Manual

Search results

Summary of Contents for ExtremeSwitching 5520 Series

Reviews:

Related manuals for ExtremeSwitching 5520 Series

Brands by name

Popular brands