2 Attach the WS-MBO-POLE01 bracket to the MBO-ART02 articulating mounting bracket using four
M3 screws, nuts, and washers.
Figure 16: The POLE01 bracket being attached to the ART02 articulating mounting
bracket
3 Attach both the cable clamps to the WS-MBO-POLE01 bracket.
Open the cable clamp by turning a flat bladed screwdriver counterclockwise. Then insert the non-
clamp end into the pole bracket through the holes.
4 Put the metal band around the pole and attach the WS-MBO-POLE01 bracket to the pole.
Install the Access Point
ExtremeMobility AP460i/e Outdoor Access Points
28
