background image

 

 

WARING: 

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or 
similarly qualified persons in order to avoid a buzzard. This appliance is not intended for 
use by persons (including children) with reduces physical, sensory or mental capabilities, 
or lack of experience and know ledge, unless they have been given supervision or 
instruction concerning use of the appliance by a person responsible for their safety. 
children should be supervised to ensure that they do not play with the appliance. 

 

IMPORTANT: Read all instructions and warnings before using the treadmill

 

IMPORTANT VOLTAGE INFORMATION! 

Before inserting the power cord into an electrical outlet, verify the voltage requirements for your area match the 

voltage of the treadmill that you have received. The power requirements for this treadmill include a grounded 

dedicated circuit, rated for one of the following: -%, 60Hz and 200amps; 208/220 VAC, 60Hz, 15amps 

or 230 VAC +-5%, 50Hz and 10amps. Check with your dealer for the exact voltage requirements of your treadmill. 

Use of the wrong voltage will damage the treadmill. 

 

WARNING! : Do not attempt to use the treadmill with a voltage adaptor. 

            Do not attempt to use the treadmill with an extension cord. 

GROUNDING

 

INSTRUCTIONS 

This treadmill must be grounded. If it should malfunction or break down, grounding provides a patch of least 

resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an 

equipment-grounding conductor and a grounding plug. The plug must be put into an appropriate outlet that is 

properly installed and grounded in accordance with all local codes and ordinances. 

 

DANGER! 

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. 

Check with a qualified electrician or service provider if you are in doubt as to whether the treadmill is properly 

grounded. 

 

CONSULT A DOCTOR IMMEDIATELY   

Warning: before starting any exercise program consult your Doctor. This is especially important for individuals 

over the age of 35 or persons with pre-existing health problems. Read all instructions before using any fitness 

equipment. We take no responsibility for personal injury damage sustained by or through the use of this treadmill. 

                                                                                         
IMPORTANT SAFETY INSTRUCTIONS

 

– Obtain a medical exam before beginning any exercise program. 

– Keep children and pets away from the treadmill. Teenagers and disabled persons must be supervised while 

using the treadmill. 

– Stop exercising if you feel faint, dizzy, or experience pain at any time while exercising and consult your Doctor. 

– Clip the SAFETY KEY onto your clothing and carefully test it prior to using the treadmill. 

– Disconnect all power before servicing the treadmill. 

– Connect the treadmill to a properly grounded outlet only. 

– Do not operate electrically powered treadmill in damp or wet locations. 

Summary of Contents for ES660B
















Reviews: