Danger:
Using power cords with a proper grounding path
Use only power cords that have a grounding path. Without a proper ground, a person who
touches the switch is in danger of receiving an electrical shock. Lack of a grounding path to the
switch can result in excessive emissions. For a translation of this statement, see
on page 43.
Connect power to the rear panel
Connect the AC power cord to the rear of the switch, and then connect the cord to an AC power
outlet. The following figure shows how to connect the AC power cord to the switch rear panel.
Important:
The VSP 4000 series has no AC power switch. When you connect the power cord to a suitable,
energized AC power outlet, the switch powers up immediately.
Figure 6: Connecting AC power to the rear panel
Warning:
Disconnecting the AC power cord is the only way to turn off AC power to the VSP 4000. Always
connect the AC power cord in a quickly and safely accessible location in case of an emergency.
For a translation of this statement, see
Translations of safety messages
on page 43.
Installing the VSP 4000 4850GTS Series
August 2018
Installing Virtual Services Platform 4850GTS Series
34
