Figure 5: IEC 60320 C16 connector
Power over Ethernet Plus (PoE+) specifications
Table 11: VSP 4450GSX-PWR+ PoE+ specifications
Maximum PoE+ W
Average PoE+ W on 12 ports
835W with one power supply
1835W with two power supplies
17.8W or 32.4W (802.3.at) — 1 power supply
• The VSP 4450GSX-PWR+ can support 802.3af 17.8W or 32.4W on each port with one power
supply installed. You can add a second power supply for redundancy.
AC power supply specifications
This section describes the regulatory AC power specifications for the VSP 4450GSX series
switches.
The following table describes the regulatory AC power specifications for the VSP 4450GSX-PWR+
switch and its TAA compliant version. The regulatory AC power specifications are based on the
maximum rated capacity of the power supplies and are not based on typical power consumption,
which is lower.
Table 12: AC power specifications
4450GSX-PWR+
Input Current:
12A/6A
Input Voltage (rms):
100 to 240VAC at 50 to 60 Hz
Power Consumption:
248 W maximum
Thermal Rating:
508 BTU/Hr maximum
Inrush Current:
70 A maximum
Turn on Condition:
1 second maximum after application of AC power
Important:
12 V output rise time, from 10 to 90 per cent, must be the maximum of 50 ms and monotonic under all
defined input and output conditions.
DC power supply specifications
The VSP 4450GSX-DC switch uses field replaceable 300W DC PSUs.
The following table describes the DC power supply specifications for this switch.
Installing the VSP 4450GSX-PWR+ series
August 2018
Installing the Virtual Services Platform 4450GSX-PWR+
30
