Chapter 1: Introduction
Altitude™ 4511 Access Point Installation Guide
6
Document Conventions
The following graphical alerts are used in this document to indicate notable situations
NOTE
Tips, hints, or special requirements that you should take note of.
CAUTION
Care is required. Disregarding a caution can result in data loss or equipment malfunction.
WARNING!
Indicates a condition or procedure that could result in personal injury or equipment damage.
Warnings
●
Read all installation instructions and site survey reports, and verify correct equipment
installation before connecting the Altitude 4511 Access Point to its power source.
●
Remove jewelry and watches before installing this equipment.
●
Verify that the unit is grounded before connecting it to the power source.
●
Verify any device connected to this unit is properly wired and grounded.
●
Connect all power cords to a properly wired and grounded electrical circuit.
●
Verify the electrical circuits have appropriate overload protection.
●
Attach only approved power cords to the device.
●
Verify the power connector and socket are accessible at all times during the operation of
the equipment.
●
Do not work with power circuits in dimly lit spaces.
●
Do not install this equipment or work with its power circuits during thunderstorms or
other weather conditions that could cause a power surge.
●
Verify there is adequate ventilation around the device, and that ambient temperatures
meet equipment operation specifications.