Power Supply
Altitude™ 4511 Access Point Installation Guide
47
Power Supply
This device is powered from an 802.3af compliant power source which is UL approved and
certified by the appropriate agencies.
This product is intended to be supplied by a UL certified product and rated from 48 Vdc,
250mA.
Radio Frequency Interference Requirements
–
FCC
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
●
Increase the separation between the equipment and receiver
●
Connect the equipment into an o
●
utlet on a circuit different from that to which the receiver is connected
●
Consult the dealer or an experienced radio/TV technician for help
Radio Transmitters (Part 15).
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Restricted Band 5.60 – 5.65 GHz