6
4.
Repeat this procedure for the other wing.
That’s it! You are done with the wings!
Fuselage Assembly
1.
Lets mount the landing gear first. Locate the aluminum landing gear, (2) 3mm
machine screws, (2) 3D Hobbyshop axles, (2) nylon insert lock nuts, (2) wheel
collars, (2) wheel spats, (2) wheels and (2) plywood rings. Use medium CA to
glue the plywood ring to the inside of each wheel spat, centered in the wheel spat
as shown in the photo below. Drill a hole through the fiberglass spat at the
location of the hole in the plywood ring.
