15
20.
Drill a small hole in the bottom of the rudder and insert the pre-bent tailwheel
wire into place. Use a piece of strapping tape to secure the tailwheel wire to the
rudder as shown. Slide the tailwheel onto the wire and retain with the small
wheel collar.
21.
Use the supplied bolts and washers to mount the motor to the mounting plate. Put
a drop of blue Loctite on the mounting bolts, place a washer on the bolt and insert
through the front of the motor mounting plate and into the threaded holes in the
face of the motor. Tighten firmly, being careful not to crush the phenolic doubler.
