Please take a few moments to read this instruction manual before beginning
assembly. We have outlined a fast, clear and easy method to assemble this
aircraft and familiarizing yourself with this process will aid in a quick, easy
build.
Please read the following paragraph before beginning assembly of your aircraft!
THIS IS NOT A TOY!
Serious injury, destruction of property, or even death
may result from the misuse of this product. Extreme Flight RC is providing
you, the consumer with a very high quality model aircraft component kit,
from which you, the consumer, will assemble a flying model. However it is
beyond our control to monitor the finished aircraft you produce. Extreme
Flight RC will in no way accept or assume responsibility or liability for
damages resulting from the use of this user assembled product. This aircraft
should be flown in accordance to the AMA safety code. It is highly
recommended that you join the Academy of Model Aeronautics in order to be
properly insured, and to operate your model at AMA sanctioned flying fields
only. If you are not willing to accept ALL liability for the use of this product,
please return it to the place of purchase immediately.
Extreme Flight RC, Ltd. guarantees this kit to be free of defects in materials
and workmanship for a period of 30 DAYS from the date of purchase. All
warranty claims must be accompanied by the original dated receipt. This
warranty is extended to the original purchaser of the aircraft kit only.
Extreme Flight RC in no way warranties its aircraft against flutter. We have
put these aircraft through the most grueling flight tests imaginable and have
not experienced any control surface flutter. Proper servo selection and linkage
set-up is absolutely essential. Inadequate servos or improper linkage set up
may result in flutter and possibly the complete destruction of your aircraft. If
you are not experienced in this type of linkage set-up or have questions
regarding servo choices, please contact us at [email protected] or
770-887-1794. It is your responsibility to ensure the airworthiness of your
model.
Summary of Contents for F3A
