6
3. Remove the horn assembly and use your #11 blade to remove the covering from inside the ink line you
traced around the control horn base. Wipe away the ink line with a paper towel soaked in denatured
alcohol. Scuff the portion of the horns that will be inserted into the elevator with sandpaper. Apply 30
minute epoxy to the slots and thoroughly coat the horns and base plate bottom. Reinsert the assembly
into the elevator and wipe away any excess epoxy with a paper towel and denatured alcohol. Place a 3mm
bolt through the horns to help insure proper alignment and set aside to dry. Repeat for the other
elevator half.
