![Extraflame MIRKA User Manual Download Page 28](http://html1.mh-extra.com/html/extraflame/mirka/mirka_user-manual_2454237028.webp)
28
ENGLISH
delay swItCH-oFF
You can program a delayed switch-off for the stove. For example, if it is 8 pm and the delayed switch-off is set to 1h, the stove will automatically
switch off at 9 pm.
if you press and hold keys 6 + 2 at the same time, the screen “DeLaY switCH-OFF” will appear
(
this setting can only be configured if the stove
is in the PreParatiON or wOrK phase
).
use keys 2 and 3 to increase/decrease the number of hours after which the stove will automatically start the final cleaning phase.
the number of hours range from OFF, 1 to 9.
Press P6 to confirm and return to the Home page.
One hour after the set switch-off time, the remaining operating time is indicated by displaying at one-minute intervals “switch off in” and
the time “HOurs xx:xx”.
InstallatIon must Be PerFormed By qualIFIed staFF and/or tHe manuFaCturer's servICe teCHnICIans
addItIonal FunCtIons
addItIonal tHermostat InstallatIon (oPtIonal)
the stove can control the room temperature through an additional thermostat (optional).
after ignition (by pressing key 6 or in chrono mode), the stove will work to reach the set value on the thermostat, displaying wOrK (closed
contact) on the screen. the standard room sensor is by-passed automatically.
when the thermostat temperature has been reached (open contact), the stove switches to minimum power level and displays mODuLatiON
ON tHe sCreeN.
CONtrOLs PrOCeDure
a mechanical or digital thermostat with a “normally open” input is required.
remove the plug from the socket.
using the figure to the side as a reference, connect the two thermostat cables (clean contact - no 230 V!).
Connect the power to the stove again.
set the set mODe to aux.
pleaSe note: the terminal can be found in the bag inSide the Stove.
Summary of Contents for MIRKA
Page 2: ...2 ENGLISH APPLY TECHNICAL DATA LABEL ...
Page 38: ...38 ENGLISH ...
Page 39: ...39 ENGLISH ...