1
2
1
25
ENGLISH
burn pot and Combustion
Chamber:
Remove the pellet slide assembly completely,
empty out any ash residues in the burn pot below.
Remove the burn pot and empty out any ash
residues.
Vacuum the ash from the combustion chamber
and glow plug tube.
Vacuum the ash behind the glass cleaning
deflector (1).
Clear all the holes in the burn pot using the
special tool supplied.
Put the burn pot back in place and push it
towards the back wall.
Put the pellet slide assembly back in place
above the burn pot.
Make sure that the burn pot and pellet slide have
been positioned correctly!
NOTE: Use a suitable vacuum cleaner with dedicated
separation container for the ash collected.
extraCtable ash drawer 1:
Remove the ash drawer and empty it into a
suitable container.
Put the ash drawer back in place.
extraCtable ash drawer 2:
Remove the ash drawer and empty it into a
suitable container.
Clean the ash drawer compartment.
Put the ash drawer back in place.
