OFF
1
2
3
4
5
6
15
ENGLISH
Control panel
BUTTON
ON/OFF
Display OF The variOUs
TexT messages
TO aCCess
The meNU
TemperaTUre
seTTiNgs
Display iCon key
indicates the reception of the radio signal
Off: radio communication absent
On: radio communication present
indicates the status of the additional thermostat input (gND - l3)
indicates the status of the fumes motor.
Off: motor disabled
On: motor enabled
Flashing: failure
indicates the operation of the ducted motor
Off = motor disabled
On = motor enabled
Flashing = the motor is operating at minimum speed, it is in
modulation (additional input open)
1
indicates the operation of the tangential fan (where present)
Off = not working
On = working
Flashing = motor at minimum speed
indicates the activation of the F1 function (future set-up)
Off = function disabled
On = function enabled
indicates the status of the pellet loading motor
Off: motor disabled
On: motor enabled
indicates the status of the weekly programming
Off: disabled
On: enabled
indicates the compensation function
Off = the function is disabled
On = the function is enabled
indicates the stove modulation
On = the stove is operating at the set power
Flashing = the power at which the stove is operating is not the set
power, the stove is modulating (for different reasons)
indicates contact of the external additional thermostat
Contact closed:
the contact of the external additional
thermostat is closed and the sTaND-
By function is disabled
Contact open:
the contact of the external additional
thermostat is open and the sTaND-By
function is disabled
Flashing with closed
contact:
the contact of the external additional
thermostat is closed and the sTaND-
By function is enabled
Flashing with open
contact:
the contact of the external additional
thermostat is open and the sTaND-By
function is enabled
indicates the presence of an alarm.
Off: indicates that there are no alarms
On: indicates the presence of an alarm
Flashing: indicates the deactivation of the depression sensor.
indicates the status of the room temperature
Off = the T° measured by the probe is higher than the set
temperature
On = the T° measured by the probe is lower than the set
temperature
hopper probe
Off = probe ok
On = probe faulty (short or open)
Flashing = modulation caused by hopper
aDJUsTiNg
OperaTiNg pOWer
