FALO’ 1CP - 2CP
ENGLISH
Step 2
Place the stove body on the metal frame tightening it with the
screws located on the rear side of the structure. Assemble the
2 zinc-plated side profi les with the 4 screws (SCREW AUT.TCB/C
4.2X9.5 BR) supplied within the box (see enlargement on the
right).
Place FALO’ in the established position.
Verify that the distances for the following connection of the
smoke discharge and air intake piping are correct.
Side profi le
Side
profi le
Step 3
Slightly tighten the front side (1) using screws, silicone washers
and nuts supplied already pre-assembled on the frame.
Fix the 2 side tiles (2 and 3) in the central tile and approach it to
the support frame following the arrows shown in fi gure.
1
2
3
4
5
6
7
Step 4
Hook the 2 side tiles (4 and 5) in the proper cavities of the support
frame and fi x them inserting the 2 hooking rods as shown in the
detail. Follow the same procedure of the bench with opposite
sequence.
For this operation, use the longest rods.
