Extraflame EMMA PlUs, User Manual

Page: 32 / 48

ENGLISH
Chrono
The chrono allows to program 4 time spans within a day to use every day of the week.
the switch-on and switch-off time can be set in every time slot, along with the days of use of the programmed time slot
and the desired room temperature (07 - 40°C).
recOmmeNDaTiONs
The ignition and switch-off times must be within the arc of
one day, from 0 to 24 and not over several days:
Before using the chrono function, set the current day and
time. Therefore check that the points listed in the “ Set clock ”
sub-chapter have been followed, so that the chrono function
works. aside from programming it, activate it as well.
example:
sWitCh-on time 07:00
sWitCh-oFF time 18:00
CorreCt
iGnition 22:00
sWitCh-oFF 05:00
inCorreCt
v2 - air
The menu allows to adjust the speed of the ducted fan in percentage.
cONTrOls prOceDUre
Š
press key 5 for a few seconds, until set CloCk appears.
Š
press key 3 several times until user is displayed.
Š
confirm using key 5. press key 5 until " v2 air " appears.
Š
Use keys 2 -3 to increase (3) or decrease (2)
Š
press key 5 to confirm and key 1 to return to the previous menus
up to the initial status.
2
enable Chrono
it allows to enable/disable the chrono and the various time slots.
cONTrOls prOceDUre
Š
press key 5 for a few seconds, until set CloCk appears.
Š
press key 5 several times until enable Chrono is displayed.
Š
press key 5 to confirm and use keys 2-3 to enable "ON" or disable "OFF" the chrono.
Š
Use keys 4 -5 to select the desired time slot
Š
Use keys 2-3 to enable "ON" or disable "OFF" the selected time slot.
Š
press key 1 several times to confirm and exit the menu.
reset
allows to reset all values modifiable by the user to the default values.
cONTrOls prOceDUre
Š
press key 5 for a few seconds, until set CloCk appears.
Š
press key 3 several times until user is displayed.
Š
confirm using key 5. press key 5 until " reset " appears.
Š
press keys 2-3 to select on and press key 5.
Š
"
Done
" will appear on the display to confirm
32