Extraflame EMMA PlUs, User Manual

Page: 19 / 48

A
ENGLISH
PEDESTAL ASSEMBLy (OPTIONAL):
Position the base in the desired point and use the feet to adjust the desired height (the bolts are positioned in the four
external sides of the pedestal in the lower part).
Remember the power socket on the rear of the pedestal so that the plug is accessible once installation is completed.
Fix the pedestal to the floor using strong steel plugs with a diameter of 8 mm.
Fix the sliding base to the frame using bolts.
Connect the flue gas exhaust pipe and the air vent as stated in the previous paragraph.
Take the insert, tilt it so that the wheels fit into the relative rails, make it run until the flue gas auger is completely inserted into
the flue gas conveyor box.
Finally open the fire door and use the supplied Allen key to turn the screw at the bottom left corner clockwise.
To understand whether the insert is correctly attached to the base, connect the plug to the socket and make sure the display
switches on.
Mount the hopper support for the pellet and insert it into the relevant coupling.
PRIMARy AIR vENT:
ThE AIR vENT MUST BE MADE OUTSIDE ThE FLUE AS
IT MUST NOT SUCk IN OvERhEATED AIR.
PERFORMING ThIS CONNECTION INCORRECTLy CAN
jEOPARDISE PRODUCT OPERATION.
Primary air
intake
pipe
N.B.: If our pedestal is used, a slot must be created in the flue
that allows the pellet level in the feed-box to be checked, thus
preventing spillage during filling.
COMFORT PLUS
For the Comfort Plus model it is mandatory to duct the hot air.
There is a cover on the back, which must necessarily be removed,
and connected to the ducting.
19