Page 4
1. WARNINGS AND SAFETY
The stoves produced in our factory are built with
maximum dedication to the individual components
so as to protect both the user and the installer
from accidents. Authorised personnel are therefore
advised to pay special attention to the electrical
connections, above all after any servicing
operation on the product, especially with regard to
the stripped part of the wires, which must not
protrude in any way from the terminal block to
prevent possible contact with the live parts of the
wire.
Installation
must
be
carried
out
by
authorised personnel, who have to provide a
declaration of conformity of the appliance
for the purchaser, who will then be fully
responsible for the permanent installation
and consequent correct operation of the
installed product. It is necessary to bear in
mind all the national, regional, provincial
and municipal laws and regulations present
in the country in which the appliance is
installed.
Extraflame
S.p.A.
may
not
be
held
responsible in the event of failure to observe
these precautions.
This instruction manual constitutes an integral part
of the product. It must always accompany the
appliance, also when it is transferred to another
owner or user or moved to another location. If the
manual gets damaged or lost, ask your local
service centre for another copy.
This stove must only be used for the applications
for which it was expressly designed.
The manufacturer declines any responsibility,
contractually or extra-contractually, for any
damage caused to persons, animals or property by
errors
in
installation,
adjustment,
and
maintenance, or by improper use.
After removing the packaging, check to make sure
that the contents are intact and complete.
If this is not the case, contact the vendor from
whom the appliance was purchased
.
The electrical components of the stove, to
guarantee correct operation, must only be
replaced with original spare parts from an
authorised service centre.
General stove maintenance must be carried out at
least once a year, scheduled sufficiently in advance
with the service centre.
The following safety precautions must be
observed:
Do not allow the stove to be used by children or
unassisted disabled persons.
Do not touch the stove if you are bare-footed or if
parts of your body are wet or damp.
Modifying the safety or adjustment devices without
the manufacturer’s approval or instructions is
forbidden.
Never pull, detach, or twist the electrical cables
coming out of the stove, even if it is disconnected
from the electrical power supply.
Avoid blocking up or reducing the size of the air
vents of the room in which the stove is installed.
The air vents are critical for correct combustion.
Keep the packaging materials out of the reach of
children and unassisted disabled persons.
During product operation the door of the furnace
must always be closed.
Avoid direct contact with parts of the appliance
which tend to heat up during functioning.
Check for the presence of any obstructions before
switching the appliance on following a long
standstill period.
The stove has been designed to function in any
climatic conditions (even critical), in particularly
adverse conditions (strong wind, ice) safety
systems may intervene, which switch the stove off.
If this happens, contact the after-sales service and
under no circumstances disable the safety systems.
If the flue should catch fire use suitable systems to
suffocate the flames or request help from the fire
brigade.
Summary of Contents for EcoLogica Idro
Page 6: ...Page 6 ...
