Extraflame Dorina, User Manual

Page: 14 / 36

viviana plus
ENGLISH
HOT aiR DuCTinG
Š
The pipe destined for ducting the hot air must have an internal diameter of 80 mm, be insulated and protected from heat loss.
Š
The length must not exceed 6 metres.
Š
installation of the pipes used for ducting the hot air must be performed by qualified staff and/or the manufacturer's
technical after-sales assistance.
FOR THis pRODuCT iT is manDaTORy TO DuCT THe HOT aiR.
iT is nOT pOssible TO DeaCTivaTe THe DuCTinG mOTOR.
DO nOT COveR OR ClOse DuCTinG!
J
DuCTinG OF THe viviana plus mODel CannOT be aDjusTeD. by DeFaulT iTs FunCTiOninG is paRallel TO
FROnT venTilaTiOn. see THe FOllOwinG CHapTeR FOR iTs manaGemenT.
The ducting extension is found in the
accessory pack inside the stove.
It is mounted by means of the 4 supplied screws.
aDDiTiOnal THeRmOsTaT FunCTiOninG FOR DuCTinG mOTOR COnTROl
For models with ducting motor there is also the possibility of thermostatting the motor itself. The connection of an external
thermostat will allow to control the ducting motor independently from stove functioning.
At this point just set the desired temperature on the thermostat. The thermostat will control the functioning of the second
motor:
Š with temperature to be reached (closed contact) the second
motor will follow the trend of the stove.
Š when the temperature has been reached (open contact), it takes the
ducting motor to 1st speed and will be
displayed by the flashing LED relative to the
ducting motor.
The ducting thermostat clamp is fitted with jumper as per standard.
14