ENGLISH
the remote Control
all that can normally be implemented through the lCD can be adjusted using the remote control.
The table below provides a detailed description of the various functions:
INFO
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1
on / off
pressing the key for three seconds, the stove will switch-on or off
2
power inCrease
pressing the key will increase the operating power
3
power DeCrease
pressing the key will decrease the operating power
4
t° inCrease
The set temperature can be increased by pressing this key
5
t° DeCrease
The set temperature can be decreased by pressing this key
6
enable/Disable
Chrono
pressing the key once will enable or disable the chrono
7
enable DelayeD
switCh-off
The delayed switch-off can be set by pressing this key.
For example, if the stove is set to switch-off in an hour, it shall switch-off
automatically once the set time elapses, displaying the countdown every
minute for delayed automatic shutdown.
8
menu
This key allows to access the user and technical menu (the technical
menu is reserved for assistance)
9
inCrease
The set temperature can be increased by pressing this key
10 esC key
The key allows the user to exit any program or display and returns to the
main menu without saving the data
11 baCk
The key returns to the display of the various menus
12 Confirmation key
This key confirms the adjustments made during the user menu
programming phase
13 forwarD
The key moves forward in the various menus
14 enable f1 funCtion
pre-set key for future applications
15 DeCrease
The key decreases the value to be set
16 stove status
pressing this key will display the general status of the stove
important note: the numbers shown on the remote control are purely indicative and are not present on the remote control supplied with the product.
type anD replaCement of batteries
The batteries are housed in the lower part of the remote
control.
To replace them, remove the battery holder (as indicated in the
figure at the back of the remote control), remove or
insert the battery according to the symbol on the
remote control and on the battery itself.
For operation, 1 Cr2025, 3v lithium buffer battery is
required.
J
if the remote Control is off beCause it has
no batteries, the stove Can be ControlleD
from the Control panel on top of it.
while replaCinG the battery, pay attention
to the polarity by observinG the symbol
on the insiDe Compartment of the remote
Control.
The batteries used contain metals harmful
for the environment. They must therefore
be disposed of separately in appropriate
containers.
23
Summary of Contents for DIADEMA - LILIANA IDRO idro
Page 1: ...1 DIADEMA LILIANA IDRO idro USER MANUAL ENGLISH INGLESE ...
Page 2: ...2 ...
Page 39: ...ENGLISH ...
