Extraflame COMFORT PLUS CRYSTAL, User Manual

Page: 22 / 36

22 ENGLISH
Chrono
The chrono allows to program 4 time spans within a day to use every day of the week.
the switch-on and switch-off time can be set in every time slot, along with the days of use of the programmed time slot and the
desired room temperature (07 - 40°C).
reCOmmenDaTIOnS
The ignition and switch-off times must be within the arc of one day,
from 0 to 24 and not over several days:
Before using the chrono function, set the current day and time.
Therefore check that the points listed in the “
Set clock ” sub-chapter
have been followed, so that the chrono function works. aside from
programming it, activate it as well.
example:
switCh-on time 07:00
switCh-off time 18:00
CorreCt
iGnition 22:00 switCh-
off 05:00
inCorreCt
v2 - air
T
he menu allows to adjust the speed of the ducted fan in percentage.
COnTrOlS prOCeDure
Š
press key 6 and set CloCk will appear.
Š
press key 2 several times until user is displayed.
Š press key 6.
Š press key 2 until "
v2 air
" appears.
Š
use keys 4 -5 to increase (4) or decrease (5)
Š
press key 6 to confirm and key 1 to return to the previous menus up to the
initial status.
2
enable Chrono
It allows to enable/disable the chrono and the various time slots.
COnTrOlS prOCeDure
Š
press key 6 and set CloCk will appear.
Š
press key 2 several times until enable Chrono is displayed.
Š press key 6, to confirm and use keys 4-5 to enable "On" or disable "OFF" the chrono.
Š
use keys 2 -3 to select the desired time slot
Š
use keys 4-5 to enable "On" or disable "OFF" the selected time slot.
Š
press key 1 several times to confirm and exit the menu.
reset
allows to reset all values modifiable by the user to the default values. The modified data is the following:
COnTrOlS prOCeDure
Š press key 6 and
set CloCk
will appear.
Š
press key 2 several times until
user
is displayed.
Š
press key 6.
Š
press key 2 until " reset " appears.
Š press keys 4-5 to select
on
and press key 6.
Š
"
Done
" will appear on the display to confirm