manualshive.com logo in svg

Extraflame ANGELA, User Manual

Share
Download
Extraflame ANGELA User Manual Download Page 11

ENGLISH

DuCtInG spECIFICAtIons oF AnGElA plus

 

The Angela Plus model is fitted with 1 ducting outlet.

features:

 

Š

diameter of ducting outlet: 80 mm

 

Š

maximum recommended ducting length 8m

 

Š

temperature controlled ducting

 

Š

regulation of air flow speed as a percentage

 

Š

independent ducting that can be activated/deactivated (On-Off)

REARMInG

If tripped, it is recommended to contact a qualified technician to 
determine the cause.

FusE

If there is no power supply to the stove, check the state of the fuse 

located in the box between the stove switch and the power cable 

connection.

InstAllAtIon Must BE pERFoRMED By quAlIFIED stAFF AnD/oR tHE MAnuFACtuRER's AFtER-sAlEs 

tECHnICIAns.

usE oF supplEMEntARy tHERMostAt to ContRol DuCtInG MotoR

In models with a ducting motor, the motor itself can also be controlled by the thermostat. When an external thermostat is connected, the 

ducting motor can be controlled independently of stove operation.

At this point, simply set the desired temperature on the external thermostat:

 

Š

until the temperature is reached (closed contact) the ducting motor will follow the stove settings.

 

Š

when the temperature is reached (open contact), the ducting motor will work at minimum speed.

The terminal for the ducting thermostat is supplied standard with a jumper.

The ducting extension is found in the accessory pack inside the 

stove. It is mounted by means of the 4 supplied screws.

11

Summary of Contents for ANGELA





































Reviews:

No comments

Brands by name

Popular brands

Load more brands