Section 916
GARMIN GNC 420W/GNS 430W
Page Date: 19. February 2014
916 - 5
Pilot´s Operating Handbook US
EXTRA 330LX
3. Turn the
small right
knob to display a window showing up to nine nearby airports.
4. Continue turning the small right knob to scroll through the list and highlight the desired airport.
5. Press ENT to confirm the selected airport, and ENT to activate the direct-to function.
916.4
NORMAL PROCEDURES
TO ACTIVATE AN EXISTING FLIGHT PLAN:
1. Press FPL and turn the small right knob to display the flight plan catalog.
2. Press the small right knob to activate the cursor.
3. Turn the large right knob to highlight the desired flight plan and press MENU to display the
flight plan catalog options.
4. Turn the large right knob to highlight „Activate Flight Plan?“ and press ENT.
5. Press and hold the CLR key to open the default NAV page.
916.5
PERFORMANCE
Not affected.
916.6
WEIGHT & CENTER OF GRAVITY
Refer to the equipment list in Section 6 of this Handbook.
916.7
SYSTEM DESCRIPTION
916.7.1
KEY AND KNOB FUNCTIONS
LEFT-HAND KEYS AND KNOBS
The COM power/volume knob controls unit power and communications radio volume. Press
momentarily to disable automatic squelch control. In the GPS 420W, this control is used only for
power.
The large left knob (COM/VLOC) is used to tune the megahertz (MHz) value (to the left of the decimal
point) of the standby frequency for the communications transceiver (COM) or the VLOC receiver,
whichever is currently selected by the tuning cursor.
Summary of Contents for 330lx
Page 2: ...Left blank intentionally ...