- 6 -
UTRACK MVT600 User Guide Version 3.0
Copyright © 2013 Extra Miles Solutions Pte Ltd. All rights reserved.
6. First Use
6.1 Install SIM Card
Check that the SIM has not run out of credit (test the SIM in a phone to make sure it
can send and receive SMS);
Check that the SIM Lock code is turned off;
If you require the function of sending an SMS location report to the authorized phone
number when it makes a call to the MVT600, please make sure the SIM installed
supports displaying caller ID.
Before installing the SIM card, turn off the power for MVT600.
Unscrew and remove cover.
Insert the SIM card by sliding it into the card holder with the chip module facing to
the connectors on PCB.
Replace the cover and screw it in.
6.2 Charging
Please connect GND (-Black) and Power (+Red) wires to 12V or 24 external power and make sure to charge the
battery for at least 3 hours
.
8 hours is highly appreciated.
Configuration and testing suggested be prior to installation.
6.3 LED Indications
GPS LED (blue)
GSM LED (green)
On/Off
Press and hold the Power On/Off button for 3~5 seconds to turn on/off MVT600.
GPS LED (Blue)
On
One button is pressed or input is active.
Flashing ( every 0.1 second)
Initializing or back-up battery power is low
Flashing (0.1 second on and 2.9 seconds off)
MVT600 has a GPS fix
Flashing (1 second on and 2 seconds off)
MVT600 has no GPS fix
GSM LED (Green)
On
A call is coming in / a call is being made
Flashing ( every 0.1 second)
Initializing
