- 10 -
UTRACK MVT600 User Guide Version 3.0
Copyright © 2013 Extra Miles Solutions Pte Ltd. All rights reserved.
Example:
0000,B05,1,22.91319,114.07988,1000,0,1
SMS Get:
353358017784062,B05,OK
Once th
e tracker goes outside of t
he circle (center: 22.91319,114.07988 and radius 1000 meters), the following
message will be received.
353358017784062,ExitGEO,22.918186,114.089823,080229123816,A,10,22,16,32,1,21,6667,850,,0000
6.4.5 Set Anti-theft – B21
Command:
0000,B21,Status
SMS Get:
IMEI,B21,OK
Note:
Status=1, turn on Anti-theft (default); the device alarms when input 2 (negative input) and input 3 (positive input)
are active;
Status=0, turn off Anti-theft; the device doesn’t alarm when input 2 (negative input) and input 3 (positive input)
are active.
6.4.6 T ime Zone– B35
Command:
0000,B35,T
SMS Get:
IMEI,B35,OK
Note:
Default time of the tracker is GMT. You can use this command to change the time on your tracker to your local
time. This command is for SMS tracking only.
T ime zone of SMS report is separated with that of GPRS data. If you need to set time zone in GPRS data, please
use SMS command: 0000, B36, T
T=0, to turn off this function.
T=[-32768,32767] to set time difference in minutes to GMT.
For those ahead of GMT, just input the time difference in minutes directly. For example, GMT+8, W000000,032,480
‘-‘is required for those behind GMT. For example, W000000,032,-120.
Example:
0000,B35,480
SMS Get:
353358017784062,B35,OK
For more details regarding SMS commands, please refer to UTRACK SMS Protocol.
6.5 Configure by Computer
This part shows you the basics in how to use the
Parameter Editor. Note: Don’t
connect MVT600 to external battery when configuring.
Please refer to the
Parameter Editor User Guide
for more detailed information regarding configuration and
functions.
