Extra Miles UTRACK MVT600, User Manual

Page: 14 / 22

- 14 -
UTRACK MVT600 User Guide Version 3.0
Copyright © 2013 Extra Miles Solutions Pte Ltd. All rights reserved.
Event Description:
Event Description
(If the box is ticked, authorized phone number will get event report
by SMS or calling)
SOS/Input 1 Active Report when input1 (SOS) is active/pressed.
Input 2 Active Report when input 2 is active.
Input 3 Active Report when input 3 is active.
SOS/Input1 Inactive Report when input 1 inactive (SOS released).
Input 2 Inactive Report when input 2 inactive.
Input 3 Inactive Report when input 3 inactive.
Low Battery Report when backup battery’s voltage is below 3.5V.
Low External Power External power (car battery) is lower than predefined voltage.
You can define voltage in Main Settings.
Speeding Report when MVT600 speeds higher than the pre-set value.
Value can be changed on tap III Main Settings
Enter Geo-fence Report when MVT600 enters Geo-fence.
Exit Geo-fence Report when MVT600 exits Geo-fence.
Geo-fence can be changed on tap III Main Settings .
External Power On Alarm when external power supply is on or recover.
External Power Off Alarm when external power supply if off or cut.
No GPS Signal Report when MVT600 enters GPS blind area or no GPS signal.
Get GPS Signal Report when MVT600 exits GPS blind area or get GPS signal.
Enter Sleep Report when MVT600 enters sleep mode.
Exit Sleep Report when MVT600 exits sleep mode.
Sleep mode can be changed on tap III Main Settings .
GPS Antenna Cut Alarm when the GPS antenna is disconnected or cut
Device Reboot Report when MV600 is rebooting.
Heartbeat Report Turn on heartbeat report
You can define heartbeat interval on tap III Main Settings.
Heading Change Report Auto report when MVT600’s direction changes over predefined angle
You can define angle degree on tap III Main Settings .
Distance Interval Report Track by distance.
Interval can be changed on tap III Main Settings .
Tow Alarm Alarm when the tracker trembles for a period of time.
You can define tow time on tap III Main Settings.
Press Input 1 (SOS) to call Make a call to authorized phone number when press input 1 (SOS).
Press Input 2 to call Make a call to authorized phone number when press input 2.