Page
22
/
37
CHANGING SETTINGS ON THE DISPLAY PANEL
1.
Turn on the device, after which the main menu is displayed.
2.
Press the 'F4' button and hold for four seconds
3.
Select the value to be changed by using the arrow keys.
4.
Press the 'ESC' button, holding for two seconds, and then press 'OK'.
5.
Move to the number to be changed by using the arrow keys.
6.
You can change the numerical value by using the arrow keys.
7.
Change all the values as desired and press "OK". Then press "ESC".
8.
Changes have been saved. Using the arrow keys, you can scroll to move between and
change values.
9.
Press "F4" when you wish to exit the menu and return to the main menu.
REMOTE START
You can start the suction unit remotely, either by using a separate switch or with a command
given by the machine tool. You must activate remote start with the 'F3' button from the display
device or from the control centre logic control system.
REMOTECONTROL
custom
settings
