EXTOL LIGHT 43228, Translation Of The Original User Manual

Page: 16 / 19

31 30
EN EN
II. Technical specifications
Order number 43228 43229
Power input 30 W 50 W
Luminous flux measured inside a sphere 3200 lm 4500 lm
with a white surface
1)
Useful luminous flux (EU) 2019/2020
1)
2400 lm 4000 lm
Light source non-replaceable LED non-replaceable LED
Supply voltage/frequency/current 180-240 V~50/60 Hz; max. 0.14A 180-240 V~50/60 Hz; max. 0.24 A
Protection marking (IP)
2)
IP 65 IP 65
Dimensions (H × W × D) mm 167 × 230 × 40 218 × 303 × 45
Installation height 1-3 m 1-3 m
Projection area 15-40 m
2
25-50 m
2
Highest nominal ambient temperature t
a
40° C 40°C
Photobiological safety class according to IEC/TR 62778 RG1 without limitation RG1 without limitation
Weight 1.0 kg 2.0 kg
Insulation class I I
Table 1
1)
The higher aforementioned value of luminous flux was measured inside a sphere with a white surface with an internal
diameter of 2 m at a distance of 1 m from the detector so that the loss of light generated by the light source is minimi-
sed. Useful luminous flux with the lower value is the luminous flux determined according to the new directive (EU)
2019/2020, where a light source is located inside a dark room of dimensions 12 × 4.5 m at a distance of 8 m from the
detector, whereby losses occur by the value compared to the measurement inside the sphere with the white surface.
2)
The IP65 protection marking on
the floodlights provides dust resistance,
protection against rain and snow.
For the safe operation of the floodlight,
it is essential to provide for the same
level of protection for the floodlight‘s
connection to the power source.
MADAL BAL A.S.
EXTOL
®
43228
A
B
C
D
E
F
G
F
kWh/1000h
2019/2015
A
B
C
D
E
F
G
30
MADAL BAL A.S.
EXTOL
®
43229
A
B
C
D
E
F
G
F
kWh/1000h
2019/2015
A
B
C
D
E
F
G
50
ENERGY LABEL OF THE FLOODLIGHTS
Fig. 1
Introduction
EN
Dear customer,
Thank you for the confidence you have shown in the Extol® brand by purchasing this product.
This product has been tested for reliability, safety and quality according to the prescribed norms and regulations
of the European Union.
Contact our customer and consulting centre for any questions at:
www.extol.eu service@madalbal.cz
Manufacturer : Madal Bal a. s., Průmyslová zóna Příluky 244, 76001 Zlín, Czech Republic
Date of issue : 23. 6. 2017
I. Description – purpose of use
y
Extol® Light 43228 and 43229 LED Floodlights are intensive light sources with a low power consumption, which thanks
to the type of the LED diodes and their arrangement, illuminate a wide area, i.e. wide-angle floodlights.
The floodlights emit white daylight with a colour temperature of 6500 K.
The Extol® Light 43228 Floodlight with a rated input of 30 W has a luminous flux of 3200 lm.
The Extol® Light 43229 Floodlight with a rated input of 50 W has a luminous flux of 4500 lm.
y Thanks to their watertightness, dust resistance, wide lighting angle, adjustable tilt angle and being maintenance-free,
mechanically durable and having a long lifetime (more than 20,000 hours), these LED floodlights are suitable for the
long-term lighting of buildings, outdoor and work areas or advertising spaces. The body of the floodlight is made from
mechanically durable plastic, thanks to which, the floodlights have a low weight relative to their size. The rear part of
the body has a light aluminium cooling plate.
The floodlights produce a very low amount of heat and the floodlight does not heat up excessively.
y To use the floodlight, it must be connected to a mains
power source by a person with
respective electrical qualifications.
A permanent installation location is
assumed for the floodlight.
The floodlights do not require any
maintenance such as, for example,
replacement of the LED light sources.