73
72
EN
EN
CONTACT DETAILS FOR NEW ZEALAND
Distributor
: Madal Bal NZ, 57 Grey Street, Onehunga, Auckland, New Zealand 1061
E-mail: [email protected]
ES Declaration of Conformity
Subject of declaration - model, product identification:
Extol® Industrial 8791812
Cordless impact wrench 400 Nm, SHARE 20 V, variant with the battery and charger.
Extol® Industrial 8791813
Cordless impact wrench 400 Nm, SHARE 20 V, variant without battery and without charger.
Manufacturer Madal Bal a.s. Bartošova 40/3, CZ-760 01 Zlín • Company ID No.: 49433717
hereby declares
that the product described above is in conformity with all relevant stipulations
of harmonisation legal regulations of the European Union:
(EU) 2011/65; (EU) 2014/30; 2006/42 ES.
This declaration is issued under the exclusive responsibility of the manufacturer.
Harmonisation norms (including their amendments, if any exist), which were used in the assessment of
conformity and on the basis of which the Declaration of conformity is issued:
EN 62841-1:2015, EN 62841-2-2:2014, EN 55014-1:2017;
EN 55014-2:2015; EN IEC 63000:2018;
The technical documentation 2006/42 ES was drawn up by Martin Šenkýř at the business address of
Madal Bal, a.s., Průmyslová zóna Příluky 244, 760 01 Zlín, Czech Republic.
The technical documentation (2006/42 ES) is available at the aforementioned business address of Madal Bal a.s.
Place and date of issue of ES Declaration of Conformity
: Zlín 22.11.2019
On behalf of Madal Bal, a.s.
Martin Šenkýř
Member of the Company‘s Board of Directors
Max. 50˚C
Do not expose the battery to direct
sunlight and temperatures over 50°C.
Do not burn the battery.
Prevent the battery from coming into
contact with water and high humidity.
Do not throw the battery out with
household waste, see subsequent
paragraph about waste disposal
20 V
Terminal voltage of a fully charged
battery without load.
XX mAh/ XX Wh
Capacity of battery; watt-hour load
of the battery.
Table 5
Note regarding table 5:
The meaning of other pictograms identical to the pictograms
shown on the cordless power tool is provided in table 6.
MEANINGS OF THE MARKINGS
ON THE LABEL OF THE CORDLESS POWER TOOL
Read the user's manual before using
the power tool.
It meets the respective EU harmoni-
sation legal directives.
Do not throw the electrical equipment
at the end of its lifetime out with
household waste, see subsequent
paragraph about waste disposal.
Year of manu-
facture and
serial number
(SN:)
The rating label of the power tool
includes the year and month of
manufacture of the power tool and
its serial production number.
Table 6
Note regarding table 6:
The meaning of the pictograms provided on the label of the
cordless power tool is provided in the text of the user‘s manual.
XII. Storage
y
Store the power tool in a safe, dry location that is out
of reach of children and protect it against mechanical
damage, direct sunlight, radiant heat sources, frost,
high humidity and ingression of water. Prior to storing
the power tool, take the battery out of it, otherwise it
will discharge more quickly.
y
Protect the battery against rain, frost, high humidity,
temperatures above 50°C, against mechanical damage
(e.g. being dropped) and never open or burn it.
y
Store the battery fully charged and to ensure the
longest possible lifetime fully charge it after several
months (no later than after 6 months). Keep the battery
and the charger out of children‘s reach.
y
The battery capacity is significantly reduced in
freezing and high ambient temperatures and it is
also damaged by these temperatures.
y
Protect the battery contacts against soiling, deforma-
tion or other damage and prevent conductive bridging
of the battery contacts by taping over the connectors,
e.g. using plastic tape, to prevent the battery from
short-circuiting, which could result in a subsequent fire
or explosion.
y
Ensure that children do not play with the battery or the saw.
XIII. Waste disposal
y
Throw packaging into the appropriate sorted waste
container.
y
According to Directive (EU) 2012/19, an unusable elect-
rical appliance must not be thrown out with communal
waste, but rather must be handed over for ecological
disposal at an electrical equipment collection point
because it contains components that are
hazardous to the environment. The battery
must be removed from the electrical equip-
ment, prior the equipment being handed over
for ecological disposal, at a battery collection
point separately (pursuant to Directive
2006/66 EC). You can find information about
electrical equipment waste and battery
collection points and collection conditions at your local
town council office or at your vendor.
