4
1
Introduction
This manual explains how to program the Exterity Remote Control handset V5. The handset is used
in conjunction with AvediaPlayer r92xx and r93xx Receivers.
In its default mode, all the buttons of the handset control the operation of AvediaPlayer Receivers.
It can also be programed to control a TV and in this state, the following buttons are
reprogrammed:
•
Standby
•
Volume +
•
Volume –
•
Mute
Programing the remote control for specific TVs is described in Chapter 3, "Programing the Remote
Control Handset ".
Scope
This edition of the manual refers only to the Exterity remote control handset V5.
Audience
This manual is intended for use by systems integrators or systems administrators who are installing
and setting up Exterity products. The manual assumes that readers are familiar with installing and
configuring network-based and audio-visual products.
Terms and Definitions
The following terms and definitions are used in this document:
Support and Contact Information
Technical Support for Exterity products is provided by authorized Systems Integrators and
Resellers. Please contact your Systems Integrator or Reseller with any Support issues.
Table 1
Terms and definitions
Term
Definition
AV
Audio Visual
EPG
Electronic Program Guide
IR
Infrared
Inactivity timeout period
In Programming mode, the length of time between key presses.
ID blink out mode
Used to identify which TV brand code-set has been programmed on
the remote handset.
