EXTER EXTER T150sr, Installation Manual

Page: 16 / 26

Chemical Resistance
16 Beijer Electronics, MAEN966
4.2 Touch Screen and Overlay
4.2.1 Autotex XE
Autotex XE covers the overlay surrounding the touch screen. Autotex XE has been
developed to endure high or widely fluctuation temperatures, excessive humidity and
strong levels of ultraviolet light.
Solvent Resistance
With continous contact, some chemicals will begin to remove the UV absorber,
reducing its UV resistance. Autotex XE withstands exposure of 5 hours duration
under DIN 42 115 Part 2 to the following chemicals without significant visible
change or loss of UV resistance:
Exposure to the following chemicals under the above conditions causes slight
glossing of the texture and a reduction in the UV resistance of the product.
Occasional splashing with the chemicals will not affect the texture or reduce UV
resistance.
Exposure to the following chemicals under the above conditions will cause blistering
to the texture. However occasional splashing will not affect texture or reduce UV
resistance.
Autotex XE is not resistant to the following:
4.2.2 Touch Screen Surface
The touch screen surface on the panel withstands exposure of more than 24 hours
duration to the following chemicals without visible change:
Acetic acid (10%) Glycerine Pure Turpentine
Ajax / Vim in solution
Gumption
1
SBP 60/95
1
Ammonia (2%)
1
Hydrochloric acid (10%)
Sodium carbonate solution
1
Ariel powder in solution
1
Linseed oil Sulfuric acid (10%)
Bleach
1
Nitric acid (10%) Tomato ketchup
Castor oil Paraffin oil Water
Caustic soda (2%)
1
Persil powder in solution
1
White Spirit
Cutting oil
Petroleum spirit
1
Windex
1
Diesel
Potassium carbonate solution
1
Wisk
Downey / Lenor
1
Potassium ferricyanide
1
Extremely faint glossing of the texture was noted.
Cyclohexanol
1
Glycol Isopropanol
Formaldehyde solution Industrial Methylated Spirits Methanol
Formic acid (50%)
1
A white stain was noted.
Acetone Methyl Ethyl Ketone Toulene
Benzyl alcohol Concentrated mineral acids Methylene chloride
Concentrated caustic solution High pressure steam at over 100°
Acetone Methyl ethyl ketone Sulfuric acid (40%)
Ammonia (5%) n-Hexane Toluene
Ethanol Nitric acid (70%) Xylene
Hydrochloric acid (6%) Salt solution (5%)