10
Infrared Setup for Windows XP
For Windows XP, no additional drivers or applications are required to use the
XTNDAccess IrDA PC Adapter. However, the following setup must be
performed in order for the Adapter to work with your computer.
1. Verify the serial connector of the Adapter is attached to a serial port of
the computer.
2. From the
Start
menu, select
Control Panel
, and then double-click the
Add Hardware
icon.
3. From the Add Hardware wizard, click
Next
.
4. Select
Yes, I have already connected the hardware
and click
Next
.
5. From the list of installed hardware, select
Add a new hardware device
and click
Next
.
6. Select
Install the hardware that I manually select from a list
(Advanced)
and click
Next
.
7. Select
Infrared devices
and click
Next.
8. Choose
Extended Systems
as the manufacturer.
9. Choose
ESI-9680 JetEye Serial Infrared Device
as the Infrared device
and click
Next
.
10. On the Hardware to Install screen, click
Next
.
11. From the Serial Port list, select the COM port number to which the
Adapter is attached and click
Next
.
