49
2.
If the
Notes
option is set to
Always
then the
thickness reading is stored at the ID location
[Linear], [Row], [Col] with notes. To change the
Notes settings, select the Notes option from the
Datalogger
screen in the MAIN Menu.
Now when you press
Save
T
(T for Thickness)
to store a reading in measurement mode, the
following
Notes
options will be presented:
No comments, not sand blasted, pitting, too hot, broken
insulation, couldn’t read scaffold, needs painting,
broken/missed plug, obstruction, port,
burner,
metalized, overlay, already cut out, and pad weld
3.
Use the up and down arrow keys to select a
note for the reading and press the
OK
key. The
selected note will be stored at the ID location,
and based on the file type, [Linear], [Row], or
[Col] is incremented. (See: Directory selection
for file type details.)