background image

MA130-en-GB_V1.0   10/16 

Display Backlight 

Long press the backlight button to toggle the display 
backlight ON or OFF. The backlight automatically dims 
after 15 seconds. 
 

 

Maintenance 

 WARNING: To avoid electrical shock, disconnect 

the meter from any circuit and turn OFF the meter before 
opening the case. Do not operate with an open case. 

Battery Replacement 

1.

 

Turn power OFF. 

2.

 

Remove the (1) Phillips head screw that secures the 
battery compartment on the back of the meter. 

3.

 

Open the battery compartment and replace the 
two (2) 1.5V AAA batteries observing correct 
polarity. 

4.

 

Re-assemble the meter before use. 

Safety: Please dispose of batteries responsibly; never 
dispose of batteries in a fire, batteries may explode or leak. 
If the meter is not to be used for 60 days or more, remove 
the battery and store separately. 

Never dispose of used batteries or rechargeable batteries in 
household waste. 

As consumers, users are legally required to take 
used batteries to appropriate collection sites, the 
retail store where the batteries were purchased, or 
wherever batteries are sold.

 

Disposal: Do not dispose of this instrument in household 
waste. The user is obligated to take end-of-life devices to a 
designated collection point for the disposal of electrical and 
electronic equipment. 

Cleaning and Storage 

Periodically wipe the case with a damp cloth and mild 
detergent; do not use abrasives or solvents. If the meter is 
not to be used for 60 days or more, remove the batteries 
and store separately. 

 

Summary of Contents for MA130










Reviews: