EN100
‐
150
‐
en
‐
US_v1.6
10/16
8
Wet Bulb Measurement
1.
Select the Wet Bulb function by pressing and holding the "HOLD" button until the display
indicates “
_Et
” then release the Hold button.
2.
Press and Hold the "REC" button until dCcF appears. Press the Power button (up) to select
C or F units. Press the REC button to save the units.
3.
The Wet bulb temperature reading will display on the LCD in C or F units.
4.
Allow several minutes of stabilization time to elapse each time the meter takes measurements
in a new location.
5.
To reverse the display, press the HOLD button for less than 1 second; ‘HOLD’ will appear on
the display, press the Power button and the display will be reversed. Repeat the procedure to
revert the display’s orientation.
Note:
In order to obtain accurate measurements for Air Temperature, RH, Dew point, Wet bulb,
Wind Chill and Heat Index, keep hands and fingers away from the sensor area (8) at the bottom of
the meter.
Heat Index Measurement
1.
Select the Heat Index function by pressing and holding the "HOLD" button until the display
indicates “
HEAt
” and then release the Hold button.
2.
Press and Hold the "REC" button until dCcF appears. Press the Power button (up) to select
C or F units. Press the REC button to save the units.
3.
The Heat Index temperature reading will display on the LCD in C or F units.
4.
Allow several minutes of stabilization time to elapse each time the meter takes measurements
in a new location.
5.
To reverse the display, press the HOLD button for less than 1 second; ‘HOLD’ will appear on
the display, press the Power button and the display will be reversed. Repeat the procedure to
revert the display’s orientation.
Note:
In order to obtain accurate measurements for Air Temperature, RH, Dew point, Wet bulb,
Wind Chill and Heat Index, keep hands and fingers away from the sensor area (8) at the bottom
of the meter.
www.
.com
1.800.561.8187
