EN100
‐
150
‐
en
‐
US_v1.6
10/16
11
Hold Function
Press the "Hold Button" to freeze the current reading value, the "HOLD" symbol appears on the
display. Press the button again to return to normal operation.
Data Record Function
1.
The Record function captures & displays the Maximum and Minimum reading values.
Start the Data Record function by pressing the "REC” button once. The "REC" symbol appears
on the display.
2.
With the REC symbol on the display:
a.
Press the "REC” button once and the "Max" symbol along with the maximum value will
appear on the display.
b.
Press the "REC” button again; the "Min" symbol along with the minimum value will appear
on the display.
c.
To exit the Data Record function, press and hold the "REC” button for at least 2 seconds.
The display will revert to the current reading and the Max/Min values will clear.
Auto Power-off
To prolong the life of the batteries, the instrument has an "Auto Power-off" function. The meter will
automatically switch off if there are no button presses in any 10-minute period. To disable the Auto
OFF feature, start Data Record as outlined above.
Battery Replacement
1.
When the LCD display shows the "
" symbol, it is necessary to replace the battery.
However, the meter will work accurately for several hours after the low battery indicator
appears.
2.
Remove the battery cover by turning the cover counter-clockwise 1/8 of a turn.
3.
Install a fresh CR2032 battery (3VDC) and then securely affix the cover.
Battery
Safety
Reminders
o
Please
dispose
of
batteries
responsibly;
observe
local,
state,
and
national
regulations.
o
Never
dispose
of
batteries
in
a
fire;
batteries
may
explode
or
leak.
o
Never
mix
battery
types;
install
new
batteries
of
the
same
type.
www.
.com
1.800.561.8187
