background image

42512  V7.0   03/08 

Introduction 

 

Congratulations on your purchase of the Model 42512 IR Thermometer. This Infrared 
thermometer measures and displays non-contact temperature readings up to 1832

o

(1000

o

C). At 30”, built-in dual lasers converge to 1” target spot to insure accurate targeting 

and temperature measurement. The adjustable emissivity feature allows the IR 
thermometer to measure the temperature of virtually any surface. Proper use and care of 
this meter will provide years of reliable service. 
 
 

 
 
Warranty 

EXTECH INSTRUMENTS CORPORATION (A FLIR COMPANY) warrants this instrument to be free of defects 
in parts and workmanship for three years from date of shipment (a six month limited warranty applies on 
sensors and cables). If it should become necessary to return the instrument for service during or beyond the 
warranty period, contact the Customer Service Department at (781) 890-7440 ext. 210 for authorization or visit 
our website at www.extech.com (click on ‘Contact Extech’ and go to ‘Service Department’ to request an RA 
number). A Return Authorization (RA) number must be issued before any product is returned to Extech. The 
sender is responsible for shipping charges, freight, insurance and proper packaging to prevent damage in 
transit. This warranty does not apply to defects resulting from action of the user such as misuse, improper 
wiring, operation outside of specification, improper maintenance or repair, or unauthorized modification. Extech 
specifically disclaims any implied warranties or merchantability or fitness for a specific purpose and will not be 
liable for any direct, indirect, incidental or consequential damages. Extech's total liability is limited to repair or 
replacement of the product. The warranty set forth above is inclusive and no other warranty, whether written or 
oral, is expressed or implied. 

 

 
 
Safety 

  Use extreme caution when the laser pointer is on 

  Do not point the beam toward anyone's eye or allow 

the beam to strike the eye from a reflective surface 

  Do not use the laser near explosive gases or in other 

potentially explosive areas 

 

Summary of Contents for 42512











Reviews: